除氨氮強酸型陽離子交換樹脂
Tulsion? T-42H 是均粒強酸型陽離子交換樹脂，氫H+/鈉Na+均粒陽離子交換樹脂，適用于高濃度氨氮去除，也可適用于其他濃度氨氮去除系統。
Tulsion? T-42H 強酸型陽離子交換樹脂，是一款具有較高的交換容量，同時擁有的物理及化學穩定品質?？梢詰糜诟邼舛劝钡獜U水處理中，出水氨氮可達到0.1ppm以下。
Tulsion? T-42H 其均勻的顆粒直徑，具有傳統的離子交換樹脂無法取代的優勢，可以減少壓力損，延長樹脂壽命，出水品質。
典型特性（TYPICAL CHARACTERISTICS）：Tulsion T-42 H


主體結構/Matrix structure Cross linked polystyrene

型式(Type) Strong acid Cation exchange resin

物理型式/Physical form 濕潤球狀/Moist spherical beads

官能團/Functional group 磺酸基/Sulphonic

粒徑Particle size (Mesh) Particle less than 0.3mm max. 1%

均勻系數(Uniformity coefficient) Max. 1.25

平均粒徑(Harmonic Mean size) 580 + 50 um

全交換容量(Total Exchange Capacity) 1.80 meq/ ml

離子型式(Ionic form) Hydrogen (H+)

膨脹系數(Swelling (approximately)) 7% from Na+ to H+ form.


濕度/Moisture content 53%

密度(Backwash settled density) 800-840 g/l in H+ form
允許溫度(Maximum temp. stability) 120°C in H+ form


PH范圍/PH range 0 - 14

溶解率(Solubility) Insoluble in all common solvents

操作條件（OPERATION CONDITIONS）： Tulsion T-42 H

大操作溫度(Operating temperature , max 0 C) 120
操作pH 范圍(Operating pH range ) 0 – 14
小樹脂床高度(Bed depth , mini mm) 800
大(Service flow rate ,Maxi ) 120 m3/hr/ m3
逆洗水量(Backwash flow rate) 9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion) 40 to 75%
再生藥劑(Regenerant ) HCl, H2SO4 for H+ form,
再生藥劑用量(Regeneration levels. ) 30 to 120 gms HCl/ lit.
40 to 250 gms H2SO4/ lit.
再生藥劑濃度(Regeneration concentration) 3 - 5% HCl, 1.5 to 3% H2SO4
少通再生藥劑時間(Regeneration Contact time, mini) 20 min.
再生流量(Regeneration flow rate ) 5 to 16 m3/hr/ m3
Regeneration slow rinse 2 BV mini.
快洗用水(Fast Rinse ) Service flow rate.
快洗水量(Fast Rinse Volume) 2 to 3 BV

查看全部介紹